Initializing Precision Pipeline
SLICING_GEOMETRY // CALIBRATING_BUILD_CHAMBER
“Bringing Idea into Reality within Minutes”
SLICING_GEOMETRY // CALIBRATING_BUILD_CHAMBER
“Bringing Idea into Reality within Minutes”
— Service 03 · Additive
“Pioneers in the field of Additive Manufacturing with some of the world's fastest and most advanced 3D printers.”
Fifteen FDM machines and three resin machines, all on our own floor — and up to 16 different colours in a single print.
Healthcare
A mandibular advancement device, manufactured by MetaFuse3D. It is presented here as a manufactured application. Clinical suitability is determined by the treating professional.
— The print floor
18 printers across two technologies, all running on our own floor.
Thermoplastic filament, layer by layer. Functional parts, larger pieces and up to 16 colours in a single print.
UV-cured photopolymer. Fine detail, smooth surfaces and small, precise parts.
Build volumes, layer resolutions and material lists are confirmed per job — tell us what you need and we will confirm which machine suits it.
— Colour
Colour changes happen inside one print rather than being painted on or assembled afterwards.
The swatches above are illustrative. Available filament and resin colours and materials are confirmed per job — tell us what you need.
Sixteen colours, one print, no secondary assembly.
Choosing a route
Rows marked On request are confirmed per job — they depend on which machine the part runs on.
| FDM | Resin | |
|---|---|---|
| Machines in-house | 15 FDM printers | 3 resin printers |
| Typically chosen for | Functional parts, larger pieces, multi-colour work | Fine detail, smooth surfaces, small precise parts |
| Colour | Up to 16 different colours in a single print | Wide range of resin colours |
| Build volume | On request | On request |
| Layer resolution | On request | On request |
| Materials | On request | On request |
| Lead time | On request | On request |
Applications
The applications MetaFuse3D names, in its own terms.
Dental and healthcare parts are fabricated to the specification supplied by the treating clinician or laboratory. Clinical suitability is determined by the treating professional.
— Where this sits
Every step stays under one roof, so nothing gets re-interpreted on the way through.
Object to digital surface
Model built to be made
Additive, up to 16 colours
Sanded, primed and painted
The same part, in quantity
Yes — up to 16 different colours in a single print is a capability MetaFuse3D states directly. It is most useful where a part would otherwise have to be printed in pieces and painted or assembled.
FDM is the usual choice for functional parts, larger pieces and multi-colour work. Resin is the usual choice where fine detail and a smooth surface matter most. Send us the part and we will tell you which route suits it.
STL, OBJ, 3MF and STEP/STP all work. If a file needs repair before it can be printed, our design team handles that in-house.
Build volume depends on which machine the job runs on, so we confirm it against your part rather than publishing a figure.
Tell us the quantity you have in mind — one-offs and batches are both normal work. We will confirm what your job means in practice.
We produce the dental applications listed on our Healthcare page, fabricated to the specification supplied by the treating clinician or laboratory. Clinical suitability is determined by the treating professional.
Send the file you want printed, or describe the part and we will work out the route.